The project aiming to develop WITTNER Finetune-Pegs also for Oriental Instruments
(Tar, Kamança, Qopuz, Setar
and Tanbur)
was proposed and pre-designed by
Mr. Mohammad Amanollahi,
Civil Engineer, Professional Musician (Azerbaijani Tar Virtuoso), Azerbaijan National Conservatoire's Graduate
from Canada.
Mr. Amanollahi's extensive
technical and musical knowledge and commitment combined with our
German engineering led to the revolutionary new pegs which will
make it tremendously easier to play
and tune these traditional instruments.
Model No. 270-AZ-KAM-04-BR
270-AZ-KAM-04-BR
Kamança
Contents:
4 x 2704M-TAR-BR
Model No. 270-AZ-QOPUZ-09-BR
270-AZ-QOPUZ-09-BR
Qopuz
Contents:
9 x 2704L-SAZ-BR
Model No. 270-AZ-TAR-09-BR
270-AZ-TAR-09-BR
Tar
Contents:
6 x 2704M-TAR-BR
2 x 2704S-TAR-BR
1 x 2704L-SAZ-BR
Model No. 270-PE-KAM-04-BR
270-PE-KAM-04-BR
Kamanche
Contents:
4 x 2704M-TAR-BR
Model No. 270-PE-SETAR-04-BR
270-PE-SETAR-04-BR
Setar and Tanbur
Contents:
4 x 2704M-SAZ-BR
Model No. 270-PE-TAR-06-BR
270-PE-TAR-06-BR
Tar
Contents:
6 x 2704M-TAR-BR
Model No. 2704L-SAZ-BR
2704L-SAZ-BR
Ø 8,8 x 34 mm/Dia. 0.35" x 1.34"
Taper 1:30
Model No. 2704M-SAZ-BR
2704M-SAZ-BR
Ø 8,1 x 23 mm/Dia. 0.32" x 0.91"
Taper 1:30
Model No. 2704M-TAR-BR
2704M-TAR-BR
Ø 12 x 58 mm/Dia. 0.47" x 2.28"
Taper 1:30
Model No. 2704S-TAR-BR
2704S-TAR-BR
Ø 9,2 x 41 mm/Dia. 0.36" x 1.61"
Taper 1:30
Model No. 2704M-SAZ
Finetune-Peg for Saz
For Saz (Baglama) all sizes
1 piece, Taper 1:30
Installation diameter: 8,1 mm/0,32"
The Finetune-Peg for Saz
has been designed with assistance
of Mr. Taner Akyol, Berlin
Dipl. Composer & Baglama.